Dual Plate Check Valves

Dual Plate Check Valves | Suppliers & Manufacturers India

PROLINE INDUSTRIAL VALVES

Manufacturer & Suppliers of Dual Plate Check Valves. These Isolation Valves Also Known as Non Return Valves. These NRV is much stronger, lighter & Superior Quality in Flow Parameters Compared to Swing Check Valves.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Dual Plate Check Valves

• Only Dual Plate Check Valve which can be installed, for flow upside down due to Spring Assisted Closure
• High Torsion Inconel Springs for Quick Closing; Valve Closes before Flow Reversal at Zero Velocity.
• Light in Weight so Easy to Install, Less Bolting and Maintenance
• Soft Seated Construction Available For Bubble-Tight Shutoff And Metal Seat Leakage Rate 3cc/Min/In
• Same Valve Can Be Installed Horizontally Or Vertically.

Material Option Of Our Dual Plate Check Valves

• SIZE: 25 MM TO 600 MM – 1 “- 24”
• BODY: C.I. ASTM A 216 WCB /WC6//WC9/CF8 / CF8M
• DISC: AISI 410 (13% CR.) /AISI 304/316/304L/316L
• SEAT: AISI 410 (13% CR.) /AISI 304/316/304L/316L+ STELLITE OPTIONAL
• HINGE PIN: AISI 410 (13% CR.) /AISI 304/316/304L/316L
• PRESSURE RATING: 150# TO 1500#
• END CONNECTION: FLANGED END AND BUTWELD END JOINT GASKET: CAF / B8 / COMPRESSED ASBESTOS FIBER / SS 304 SPIRE WOUNDED WITH CAF INSP & TEST STD: BS 6755/API 6D /API 598
• SPECIAL TYPE: WITH BY PASS ARRANGEMENT VALVE ON REQUEST

PROLINE INDUSTRIAL VALVES

Manufacturer & Suppliers of Wafer Type Check Valves With Heavy Duty and High Quality. These Wafer Check Valves are made from Bar Stock Single Piece Design, This have Short Pattern Wafer Type Body Conforming to API6D and ASME B 16.10 Face To Face Dimension.

The Body out Side Diameter and Thickness is As per Pressure Rating and Class like PN 10 PN 16 ANSI #150 BS 10 Table D/ E. These Valves are Suitable for Mounting between Flange Weld Neck type and Slip on Matching Companion Flanges as Per Standards.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Wafer Check Valve

• Low Face To Face Dimension, Light In Weight, Economical And Easy Installation.

• Suitable for Horizontal Flow and Also Vertical flow with Mounting of Heavy Spring Loaded type.

• Body and Disc of Superior Quality, Single-Piece Construction Bar Stock Rod Machined, Give Long Functional Life

• Tight Shut off, Low Maintenance, Single Moving Parts and Replaceable Seals.

Material Option Of Our Wafer Check Valve

• Size: 25 Mm To 600 Mm – 1 “- 24”
• Body: C.I. Is 210 Gr Fg 200, M.S,Astm A 216 Wcb /Wc6//Wc9/Cf8
• Clapper: S.G.I., Wcb,Cf8, Cf8M
• Hinge Pin: Aisi 410 (13% Cr.),304 / 316
• Clapper Seal “O” Ring: Nitrile, Epdm , Viton , Silicon , Ptfe
• Body Seal: Nitrile, Epdm , Viton , Silicon , Ptfe
• Lifting Eye: M.S.
• Pressure Rating: Pn 10 – 1092, Pn 16 – Bs 10 Table D & E, Ansi #150
• Temperature: Up To 220 °C As Per Material
• Press Testing & F Tof: Api 598 & Asme B 16.5

PROLINE INDUSTRIAL VALVES

Manufacturer of Wide Ranges of All Types of Butterfly Valves as per Application to Application Design of Flow Control Industry needs. We have huge set up for Butterfly Valve and Has In House facilities like Foundry Inward Raw Material Inspection, Testing, Machining, Assembling, Final Inspection, painting & generally ready Stock of Butterfly Valves.

We have Wide Selling Network in India’s Major Cities for All Types of Butterfly Valves in Delhi, Mumbai, Kolkata, Punjab, Chennai, Bangalore, Pune and Hyderabad. Our Products are made As per International Standards, High Export Quality, and Quick delivery and full fill the needs of all Types of Industries.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Butterfly Valve

• Body Casting of Superior grade, additional Strength, maximum Flow Capacity with Lowest Pressure Drop, High Pressure Rating , Extended neck Design are Provided
• Thru-stem design with high strength and Unique Stem retention system to provide blow-out proof stem, One piece stem with close tolerances double D drive Design In Handle eliminates the need for disc screws or taper pins, self-adjusting stem seal, suitable for vacuum And Square Made as per direct mounting of all kind of actuators
• Nylon coated high strength disc with Round, polished disc edge and hubs ensures excellent corrosion resistance, Low Torque and Bi-directional flow Type Centric Disc Design
• Molded-in resilient seat provides 100% bubble-tight shutoff, zero leakages, concentric seating, lower torques and longer seat life. integral Molded Seat with body

Material Option Of Our Butterfly Valve

• Size: 50 Mm To 900 Mm – 2″-36”
• Body Material: Cast Iron, Ductile Iron, Ic-Wcb,Ss304,Ss316,Ss316L
• Gate Material: M.S,Ss 304,Ss316,Ss316L,Nitriding,Stelliting
• Seat Material: Ptfe Teflon, Epdm,Viton, Silicone, Metal To Metal, Soft Seating
• End Connection: Full Lugs, Wafer Type, Flangeless, Double Flanged Type
• Drilling: As Per Ansi B 16.5 / Bs / Din / Jis / Is Standard, Rest On Request
• Design & Insp: Ms Sp 81 Design Standard And Api 598
• Operation Type: Hand Wheel Type, Gear Operated, Pneumatic Cylinder, Electrical Actuator

PROLINE INDUSTRIAL VALVES

Manufacturer & Suppliers of Handle Operated Ball Valves and Gear Operated Ball Valves. Our valve are Bi–directional Valve with Zero Leakage at Maximum Rated Pressure. The Ball valves are Design like Single Piece Ball Valve, Two Piece Ball Valve, and Three Piece Design Ball Valve, With Flow Pattern are 2 way Ball Valves, 3 way Ball Valves and 4 Way Ball Valves.

Single Piece Design Ball Valve is Investment Casting WOG 1000 Series PN 40 Rating, Heavy Duty and High Pressure Rating Single Piece Ball Valves. These are Full Bore Blow-Out Proof Stem with Floating Ball Soft Seated Design with Internal Solid Ball Inside.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Ball Valve

• Ball Valves Give Greater Flows, Wider Media Compatibility.
• Ball Valves Has Both Side Seals Covered of Internal Ball, And Can Give Tight Shut Off After Years of Cycle Operation.
• High Grade of Material Used, Easy To Operate, Long Life, Less Maintenance
• High Quality Seals Used and Multiple Stem Sealing with O- Rings Makes Valve Tight Shut off in also Vacuum Condition.

Material Option Of Our Ball Valve

• Flow Pattern: 2 Way, 3 Way, 4 Way & 5 Way
• Size: 8 Mm To 400 Mm – ¼ “- 16”
• Body: C.I,Wcb, Cf8, Cf8M, P.P, Upvc, Lined,Brass, Fcs
• Ball: Aisi S.S, Cf8, Cf8M, P.P, Upvc, Lined, Forged
• Shaft: Aisi S.S 410, 304, 316, 316L, K500 Monel
• Seat: Rptfe, Teflon, Peek,Gft, Metal To Metal
• Pressure Rating: Ansi 125 #, 150 #, 300 #, 800#
• Ends: Screwed Type, Socket Weld Type, Flanged Type, Tc End
• Leakage: Tight Shut- Off To Class Vi
• Operation: Hand Lever Operated, Gear Operated And Actuator Operated

PROLINE INDUSTRIAL VALVES

Manufacturer & Suppliers of High Quality of Manual Knife Edge Gate Valves. This Handle Operated Knife Gate Valve is been Used for Slurry Line, Sewage Waste water, Viscous Liquid, Molasses Application, heavy Load Vessel and High Temperature Line For Various Application.

These are Generally Mounting Vertical and Horizontal Position under the Conical Cone Shape Vessel Tank, Below Hopper, Pressure Vessel and high load Vessel for shut off valve in Line.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Knife Edge Gate Valve

• High Accuracy Degree Machined at Bottom Ultra Thick Gate and Lapped Integral to Prevent 100 % Leakage Bubble-Tight Shut-off Knife Edge Gate Valves in Sealing.

• Body Casting of Superior grade, additional Strength Investment Casting One-Piece body casting, Replaceable Seat Design, Optional in Seat Ring, rugged stainless steel Highly Lapped Thicker gate and Various Type of hardened trim Available
• Easy Installation and Maintenance
• Full port design maximum Flow Capacity for greater flow capacity and low pressure drop Available in Proline Make Knife edge Gate Valves

Material Option Of Our Knife Edge Gate Valve

• Size: 50 Mm To 900 Mm – 2″-36”
• Body Material: Cast Iron, Ductile Iron, Ic-Wcb,Ss304,Ss316,Ss316L
• Gate Material: M.S,Ss 304,Ss316,Ss316L,Nitriding,Stelliting
• Seat Material: Ptfe Teflon, Epdm,Viton, Silicone, Metal To Metal, Soft Seating
• End Connection: Full Lugs, Wafer Type, Flangeless, Double Flanged Type
• Drilling: As Per Ansi B 16.5 / Bs / Din / Jis / Is Standard, Rest On Request
• Design & Insp: Ms Sp 81 Design Standard And Api 598

Gate Valve | Suppliers & Manufacturers India

PROLINE INDUSTRIAL VALVES

Manufacturer & Suppliers Of High Quality Of Out Side Screw And Yoke Type Bolted Bonnet Rising Stem Flexible Solid Wedge Gate Valves, Non Rising Stem Sluice Gate Valves.

These Gate Valves Are Also Used For Main Stream Line As Stop Valve With Bypass Arrangement Gate Valve In Super Heated Steam Lines. Cast Steel Gate Valve Are Available In Wide Ranges, Sizes And Pressure Rating.

These Gate Valves Are Been Used For Variety Of Fluid. Gate Valves Have Long Life In Working Cycle. This High Performance Gate Valves Are Design As Per Application To Application. Below Seal Gate Valves are With Positive Stem Sealing to prevent the zero Stem Seal Leakage in Environment.

These are mainly Used For Vacuum Lines, High Temperature and High-Pressure Lines. Cryogenic Gate Valves are Provide for Low Temperature and Low Pressure Line. Resilient Seated Gate Valve.

Various Features Include in Proline Made Gate Valves are as per its High Quality Gate Valves, High Performance Type Gate Valves. Isolation Gate Valves, OS&Y Type Gate Valves. Flexible Wedge Gate, Straight Pattern, Single Piece Spindle, Trim 8 With13 %Cr.Steel Overlay, With Stellite # 6 Seat Ring & Back Seat Integral Fixed Or Screwed Type Pressed For Renewable Seat & Replaceable Seat Type Gate Valves.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Gate Valve

• Proline Industrial Valves High performance Gate Valve are Heavy Duty with Higher Graded Casting Quality, Heavy Pattern and Rugged Flexible Wedge with High Lapped Finished in Combination with Seat for Longer Life.
• High Accuracy Degree Machined at Body and Bonnet fixing Areas.
• Thicker gate , Hard Face Seat Type, Straight Flow design for Greater Flow Capacity and Minimal Pressure Drop in Proline Industrial Valves Make Gate Valves

• Available in Hand wheel Operated Gate Valve, Gear Box Operated Gate Valves and Electrical Actuator Operated Gate Valves.

Material Option Of Our Gate Valve

• Size: 25 Mm To 900 Mm – 1″-36”
• Pressure Rating: Asa – 150 – 300- 600- 800- 900-1500-2500 Class
• Body Material: Cast Iron,Cast Steel Ic-Wcb, Forged Steel,Ss304, Ss16, Ss16L
• Seat Ring: Hardfacing Stellite # 6 Optional
• End Connection: Asme Flanged B 16.5 /16.47 / Swe B 16.11 / Bwe B 16.25 / Screwed (Bsp/Npt)
• Design & Insp: Api-600 / Api-6D / Asme B16.34 / Bs-1873 / Bs-1868 / Api-602 / Bs-5352
• Operation Type: Hand Wheel Type, Gear Operated And Electrical Actuator Operated

PROLINE INDUSTRIAL VALVES

Manufacturer & Suppliers of High Quality of Out Side Screw and Yoke Type Bolted Bonnet Rising Stem Globe Valves. Globe Valves are mainly used for Throttling Application as a Flow Control Valves.

Globe Valves has Low-Flow Coefficients, Globe Valves Can Maintain High Pressure Drop. These Globe Valves are also, Used for Main Steam High Pressure Lines  as Stop Valve with Bypass Arrangement Globe Valve.

Cast Steel Globe Valve Are Available In Wide Ranges, Sizes And Pressure Rating. This Globe Valves Are Been Used for Variety of Fluid, for frequent cycling to control the Flow.

Our Globe Valves Have Long Life In Working Cycle, this High Performance Globe Valves Are Design As Per Application to Application and can be machined as Per Required CV Values, Flow Rate and Pressure Drop, Pressure Controlling With Number of Seat and Plug Present and Important Cage Balanced Guide Type Designed.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Globe Valve

• Proline Industrial Valves High performance Globe Valve are Heavy Duty with Higher Graded Casting Quality, Heavy Pattern and Rugged Plug with High Lapped Finished in Combination with Seat for Longer Life.

• High Accuracy Degree Machined at Plug and Seat Areas with Cage Balance Guide Design for Throttling Application and Meeting The Required Flow Parameters.

• Thicker Plug, Hard Face Seat Type, Greater Control, in Flow, High-pressure Drop and High Accuracy to meet the Flow Control Parameters.

• Available in Hand wheel Operated Globe Valve, Gear Box Operated Globe Valves and Electrical Actuator Operated Globe Valves.

Material Option Of Our Globe Valve

• Size: 25 Mm To 900 Mm – 1″-36”
• Pressure Rating: Asa – 150 – 300- 600- 800- 900-1500-2500 Class
• Body Material: Cast Iron,Cast Steel Ic-Wcb, Forged Steel,Ss304, Ss16, Ss16L
• Seat Ring: Hardfacing Stellite # 6 Optional
• End Connection: Asme Flanged B 16.5 /16.10/16.34 / Swe B 16.11 / Bwe B 16.25 / Screwed (Bsp/Npt)
• Design & Insp: Api-600 / Api-6D / Asme B16.34 / Bs-1873 / Bs-6755 P1 / Api-598 / Bs-5352
• Operation Type: Hand Wheel Type, Gear Operated And Electrical Actuator Operated

Swing Check Valve | Suppliers & Manufacturers India

PROLINE INDUSTRIAL VALVES

Manufacturer & Suppliers of Swing Type Check Valves and Piston Lift Up Check Valves. These NRV Non Return Valves are Bolted Cover Design, with Straight Type Body with Flanged ends and Screwed Ends. Swing Check Valves are Suitable for Horizontal flow or Vertical flow flowing from bottom to (Fluid Flowing Upward) Pipe Layouts. Lift Type Check Valve Bolted Cover, Are Only Suitable for Horizontal Line.

Proline Industrial Valves also Makes Special Swing Type Check Valves with by Pass Arrangement Valve and With Stellited Seat to meet the Requirement for High Pressure and High Temperature Lines. IBR (Indian Boiler Regulation) And Non IBR Swing Type Check Valves with Third Party Inspection are also available. Proline Industrial Valves Makes Swing Type Check Valves With Teflon Seated For Low Vacuum Line. The Disc is Highly Lapped for its Long Life.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Swing Check Valve

• Proline Make Swing Type Check Valve (Non Return Valve) Suitable for Horizontal Or Vertical Lines (With Flow Up-Ward Direction)

• Body and Cover Casting Of Superior Grade, One-Piece Construction Ultra Thick Disc, With Hard Faced High Accuracy Lapped To a Mirror Finish.

• Light In Weight And Easy Installation With Replaceable Seat Arrangement Simple And Quick Maintenance

• Greater Flow with No Pressure Drop

Material Option Of Our Swing Check Valve

• Size: 25 Mm To 600 Mm – 1 “- 24”
• Body: C.I. Astm A 216 Wcb /Wc6//Wc9/Cf8 / Cf8M
• Disc: Aisi 410 (13% Cr.) /Aisi 304/316/304L/316L
• Seat: Aisi 410 (13% Cr.) /Aisi 304/316/304L/316L+ Stellite Optional
• Hinge Pin: Aisi 410 (13% Cr.) /Aisi 304/316/304L/316L
• Pressure Rating: 150# To 1500#
• End Connection: Flanged End And Butweld End
• Joint Gasket: Caf / B8 / Compressed Asbestos Fiber / Ss 304 Spire Wounded With Caf
• Insp & Test Std: Bs 6755/Api 6D /Api 598
• Special Type: With By Pass Arrangement Valve On Request

PROLINE INDUSTRIAL VALVES

Leading Manufacturer Exporter & Supplier of All Major type of Sight Glass Valve and Flow Indicator Valves. This Sight Glass Valve Body is Made of Investment Casting High Grade Type or Fabricated Type as Per Client Requirement. Sight Glass Valve Has High Tempered Toughened Borosilicate Glass for, High Temperature Resistance and Corrosion Resistance.

These are Mainly used for Application Like Corrosive Chemicals, Acids Lines, Water Purification Lines In Identifying Clarity of Media, Pharmaceutical Fluid For Indication of Colored Changes in Liquids and Other Characteristics Changes, Which Can Give on Spot Indication For Process.

Our Sight Glass has High Thermal strength. Sight Glass are Bi-Directional Valves Can be installed in Horizontal or Vertical Position. It can be used For Flow Level Indication and Flow View Indication. In any Non Transparent Pipe Lines. These are Reliable and Economical Ways to Verify the Flow and Quantity of Fluid in Industries.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Sight Glass

• It is Lower Cost Valve. Easy in Installation and Light in Weight.
• It is Low Maintenance Valves.
• Standard Tempered Borosilicate Glass with Wide View Area to Inspect the Fluid.
• On Site Valve Can are Open and Fixed with Bolting Nut or Allen Key Design and Replace Glass. Easy Maintenance

Material Option Of Our Sight Glass

• Size: 25 Mm To 300 Mm – 1 “- 12”
• Body: M.S, Cast Steel, Investment Casting Ss 304,316, 304L, 316L, P.P, Brass
• Cover: M.S, Cast Steel, Investment Casting Ss 304,316, 304L, 316L, P.P, Brass
• Glass: Tempered Toughened Borosilicate Glass
• Seals: Teflon,Ptfe,Gft
• Stud Nut: M.S / Ss 304 / Ss 316
• Washer: Ptfe
• Bolt & Nut: 6 Hexagon Steel-304-316 ,8.8 Galvanized
• End: Flange Ansi B 16.5 / Bs 10 Table / Din / Is 6392 Std./ Screwed End Bsp
• Testing Standard: Bs 5146 – Pn- 6 Pn 10 – Pn 16

PROLINE INDUSTRIAL VALVES

Manufacturer & Exporter of All Major type of Y Type Flush Bottom Valves & Ball Type Flush Bottom Valve. Proline Industrial Valves Y type Flush Bottom Valves are Manufacture of Investment Casting with Higher Grade S.S. Quality & Heavy Duty Design. Y type Flush Bottom Valves Can Be Supplied by Manual Handle Wheel Operated, Gear Operated and Pneumatic Cylinder Operated.

Various Type of Flush Bottom Valves are Manufactured and Supplied by Proline Industrial Valves are Like Y type Flush Bottom Valves, Y Type Fabricated Flush Bottom Valves, Ball Type Flush Bottom Valves, Jacketed Type Flush Bottom Ball Valves, Reduce Port Type Flush Bottom Valves, Y” Type Flush Bottom Valves With Handle Operated, Y” Type Jacketed Flush Bottom Valves, “Y” Type Actuated Flush Bottom Valves, Lined Flush Bottom Valves, “Y” Type Flush Bottom Ball Valves With Pneumatic Actuator Operated, Y type Lined Flush Bottom Ball Valves, Rotary Pneumatic Actuator Actuated Flush Bottom Ball Valves, Y type Flush Bottom Ball Valves Pneumatic Cylinder Operated.

Features Of Our Y type Flush Bottom Valve

• Flush Bottom Valves are Specially Design for Heavy Slurries Lines, Viscous Liquid and Sludge Type Media.
• Flush Bottom Valves Provide Tight Shut off With Zero Leakage.
• Flush Bottom Valves are lower in Cost.
• Flush Bottom Valves has Low Maintenance.
• Flush Bottom Valves are Available in Jacketed Type, for Hot and Cold Line Provision.

Material Option Of Y type Flush Bottom Valve

• Size: 25 Mm To 200 Mm – 1 “- 8”
• Body: Astm A 216 Gr Wcb /Cf8/Cf8M
• Ball: Aisi 304/ Aisi 316
• Stem: Aisi 304/ Aisi 316
• Stem Seals/ Gland Packing: Ptfe / Gft
• Ball Seat: Ptfe / Gft
• Yoke Sleeves: Bronze
• End: Wafer Type Flange Type Ansi B16.5/ Bs10 Table D,E,F
• Mfg Standard: Bs 5351
• Testing Standard: Bs 6755 Part 1